These pools are constructed with aqua blocks and re enforced concrete. Suitable for professional installation and with support for DIY |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| Water circulation can be problematic in rectangular pools. However, the Hydro-Kit into the corners, making the angles less acute, aiding water circulation. Together with the effective filtration units on offer, debris does not collect in the corners as is the case with some rectangular pools. A Hydro-Kit construction provides a pool with filtration which has total water movement throughout the swimming pool. Due to the size of piping a large capacity pump is not required, a maximum of 20 cubic metres is all that is required for the larger pools. The liner is secured with a security beading system which prevents the liner from being pulled out inadvertently. A Pool light is fitted as standard with all 3 models of Hydro-Kit swimming pools available from us in Limousin. For an estimate or enquires regarding Hydro-Kit construction in France, please contact us |
| Pool marked out, hole dug and gravel base compounded. Metal re enforcing laid. |
| 10cm Concrete screed underway |
| Aqua blocks laid with metal trellis through them for added support and strength |
| Pool ready for liquid concrete into blocks |
| Liner installed and cut in to Roman End steps |
| Hydro-Kit construction and surround completed, with security installed |
| Diagram above shows Hydro-Kit construction with a shelf to enable a deep and shallow end. This is constructed on top of the flat base. |
Hydro-Kit swimming pool construction
